Aligning The Microplate Transfer Position; Technical Support - Molecular Devices StakMax User Manual

Technical Support

5012878 A

Aligning the Microplate Transfer Position

Molecular Devices service representatives initially align the position for
transferring a microplate between the StakMax instrument and the
SpectraMax Paradigm Platform. In most cases, the alignment process
needs to be performed only once, following installation. Occasionally,
users might need to use the StakMax Software Transfer Position
Teaching wizard to re-align the position.
The Transfer Position Teaching wizard provides detailed on-screen
instructions to assist in completing the alignment process. For more
information, see Aligning the Microplate Transfer Position on page
Molecular Devices is a leading worldwide manufacturer and distributor
of analytical instrumentation. We are committed to the quality of our
products and to fully supporting our customers with the highest
possible level of technical service. In order to fully benefit from our
technical services, complete the registration card and return it to the
address printed on the card or register online.
If you have any questions regarding your StakMax instrument, contact
your local sales representative.
WARNING! BIOHAZARD: It is your responsibility to
decontaminate the instrument, as well as any accessories,
before requesting service by Molecular Devices representatives
and before returning the instrument or any components to
Molecular Devices.
WARNING! All maintenance procedures described in this
manual can be safely performed by qualified personnel.
Maintenance not covered in this manual should be performed
only by Molecular Devices representatives.
WARNING! Never perform any operation on the instrument in
an environment where liquids or potentially damaging gases
are present.
StakMax Microplate Handling System User Guide
45.
103