Table of Contents
Advertisement
Automatic spray gun M14
Inserting the needle seals
Fig. 15: Installation position
1.
WARNING!
Risk of injury through the use of incorrect spare parts!
Insert the slotted rings ( Fig. 15/1, 2 and 3) into the needle guide. Here, make sure that the
slotted rings ( Fig. 15/1, 2 and 3) are in the correct position.
Fig. 16: Inserting the needle seals
2.
If necessary, insert O-rings ( Fig. 16/1 and 3).
3.
Carefully insert needle guide ( Fig. 16/2) into the control section.
■ 200-0153
ENGLISH
GB–35
Advertisement
Table of Contents
