Krautzberger M14 Operating Instructions Manual page 36

If necessary, install the fluid needle (
on page 30).
4. Tighten head section ( Fig. 16/4) with fastening screws ( Fig. 16/5).
5. Screw on the cap nut (
on page 29)
NOTICE!
Lightly grease springs, threads and seals with the "Krautzberger special grease" during instal-
lation.
"Krautzberger special grease" can be purchased from Krautzberger GmbH. See the last page
for contact data.
GB–36
Operating instructions
Ä Chapter 8.5 'Changing the fluid needle'
Ä Chapter 8.4 'Changing the fluid nozzle and the air nozzle'
T-Dok-214-GB-Rev.2
mail@krautzberger.com, www.krautzberger.com