Ricoh M281 Series Service Manual page 233

4.6.15 PAPER EXIT TRAY
1. Remove the scanner unit. (page 4-76)
2. Remove the controller box. (page 4-128)
3. Remove the following covers.

Left lower cover (page 4-29)

Paper exit cover (page 4-38)
4. Release the lock lever [A] by rotating it towards you, and then remove the toner
cartridge [B].
5. Release the two hooks from the operation panel arm upper cover [A].
6. Insert a flathead screwdriver into [A] to release the hook, and then remove the
operation panel arm upper cover [B].

Be careful not to damage the hooks on the inside of the operation panel arm upper
cover when you remove or install the operation panel arm upper cover.
SM
Exterior Covers (MP 501/601)
4-39 D255/D256/M281/M282