Ricoh M281 Series Service Manual page 171

12. Check the display and make sure that the Data Overwrite icon appears.
When Auto Erase Memory is enabled, the Data Overwrite icon will be indicated in the bottom
left of the panel display.
Icon
2.23.3 DATA OVERWRITE SECURITY (SP 5300/5310)
Before You Begin the Procedure
1. Make sure that the following settings (1) to (3) are not at their factory default values.
(1) Supervisor login password
(2) Administrator login name
(3) Administrator login password
If any of these settings are at their factory default values, tell the customer that these settings
must be changed before you do the installation procedure.
2. Make sure that "Administrator Authentication Management" is on.
1. Log in as the administrator from Web Image Monitor.
2. [Device Management] -> [Configuration] -> [Device Settings] -> [Administrator
Authentication Management]
SM
Icon name
This icon is displayed when there is
Dirty temporary data to be overwritten, and
flashes during overwriting.
This icon is displayed when there is no
Clear
temporary data to be overwritten.
2-143
Security Setting
Explanation
D255/D256/M281/M282