Ricoh M281 Series Service Manual page 908

Bit Switches - 1
System Switch 13 - Not used (do not change these settings)
System Switch 14 - Not used (do not change these settings)
No Function
0 Not used
1 Going into the Energy Saver
mode automatically
0: Enabled
1: Disabled
2-3 Not used
4-5 Interval for preventing the
machine from entering Energy
Saver mode if there is a pending
transmission file.
Bit 5 Bit 4
0 0
0 1
1 0
1 1
6-7 Not used
D255/D256 FAX OPTION
System Switch 15 (SP No. 1-101-022)
Do not change the settings.
1: The machine will restart from the Energy
Saver mode quickly, because the +5V power
supply is active even in the Energy Saver
mode. The LED of the operation switch is
flashing instead of entering Energy Saver
mode.
Use this setting if an external telephone has to
be used when the machine is in the Energy
Saver mode.
Do not change these settings.
If there is a file waiting for transmission, the
machine does not go to Energy Saver mode
during the selected period.
After transmitting the file, if there is no file
waiting for transmission, the machine goes to
Setting
the Energy Saver mode.
1 min
30 min
1 hour
24 hours
Do not change
Comments
74 SM