Ricoh M281 Series Service Manual page 199

4.4 IMAGE ADJUSTMENT
4.4.1 PRINTING

Make sure the paper is set correctly in each paper tray before you start these
adjustments.

Use Trimming Area Pattern (SP2-109-003, No.14) to print the test pattern for the
following procedures.

Set SP2-109-003 to "0" again after completing these printing adjustments.
Registration: Leading Edge/Side-to-Side
A: Leading Edge Registration (4 ± 2.5 mm)
B: Side-to-side Registration (4 ± 2.5 mm)
1. Check the leading edge registration [A] for each paper feed station, and adjust them
using SP1-001.
Paper Feed Station
Tray 1 (Main unit)
Tray 2 (Optional tray)
Tray 3 (Optional tray)
Tray 4 (Optional tray)
Tray 5 (Optional tray)
Bypass Tray
Duplex Tray
SM
SP No.
SP1-001-001
SP1-001-002
SP1-001-003
SP1-001-004
SP1-001-005
SP1-001-006
SP1-001-007
4-5
Image Adjustment
Adjustment Range
4±2.5 mm
D255/D256/M281/M282