Ricoh M281 Series Service Manual page 149

2.17 SD CARD APPLI MOVE
2.17.1 OVERVIEW
The service program "SD Card Appli Move" (SP5-873) lets you copy application programs from
one SD card to another SD card.
You cannot run application programs from Slot 2. However you can move application programs
from Slot 2 to Slot 1 with the following procedure.
When merging SD cards, the target SD card should have the largest memory size of all the
application SD cards.
Be very careful when you do the SD Card Appli Move procedure:

The necessary data for authentication is transferred with the application program from an SD
card to another SD card. Authentication fails if you try to use the SD card after you copy the
application program from one card to another card.

Do not use the SD card if it has been used before for other purposes. Normal operation is not
guaranteed when such an SD card is used.

Keep the SD card in a safe place after you copy the application program from one card to
another card. This is for the following reasons:
1) The SD card can be the only proof that the user is licensed to use the application program.
2) You may need to check the SD card and its data to solve a problem in the future.
2.17.2 SD CARD APPLI MOVE
1. Choose an SD card with enough space.
2. Enter SP5-873 "SD Card Appli Move". This SP copies the application programs from
the original SD card in SD Card Slot 2 to the SD card in SD Card Slot 1. Move the
application from the SD card in Slot 2 to the card in Slot 1.
3. Exit the SP mode.
SM 2-121
SD Card Appli Move
D255/D256/M281/M282