Table of Contents
Advertisement
EN
USER MANUAL
USER MANUAL
Normal use / Charging
Connect the charging cable to the EV. Charging will start
immediately if the EV is ready for charging. See your EV charging
manual.
When finishing charging, follow the car's instructions.
After charging: Release first the charging cable from your EV and
place the charging cable at designated place.
Note!
It is the EV that determines how much electrical current (A) the GTB
should provide. GTB Twinbox can provide the maximum rated
power according to the rating label. When both sides are in use,
the GTB Twinbox will balance the load equally between both
sides.
In cases where the required power exceeds the available power
to the Twinbox, the left hand side is prioritized. The electrical
current can also be reduced by the Dynamic Load Management
(DLM) functions.
If the GTB Twinbox is equipped with outlets, it is important to use
correct charging cable.
For example, if you want to use 32A from the Twinbox, you must
use a 32A charging cable.
Note that there are both 1-phase and 3-phase charging cables
in the market. Use the correct cable to your EV. To find the correct
type of cable needed to your EV, please see the EV manual.
21
Hide quick links:
Advertisement
Table of Contents
