Rfid Reader Installation - GARO Twinbox GTB Series Assembly Instructions / End User Instruction

RFID reader installation

1. Turn off the electrical power to the GTB twinbox
2. Assembly the RFID readers according picture 15-17.
Note: Both DIP switches should set to ON on both RFID readers,
see picture 18.
A wifi module needs to be installed to the Master GTB Twinbox.
(picture 17)
EN
INSTALLATION OF STANDALONE GTB TWINBOX
(picture 16)
(picture 18)
14
DIP switch ON OFF
2
1
(picture 15)