Connect Gtb Twinbox To A Local Network Via Wi-Fi; Connect Gtb Twinbox To A Local Network Via Ethernet With Dhcp; Connect Gtb Twinbox To A Local Network Via Ethernet Using Static Ip-Adress; Factory Reset Of Network Settings - GARO Twinbox GTB Series Assembly Instructions / End User Instruction

Connect GTB Twinbox to a local network via Wi-Fi

The GTB Twinbox will attempt to connect to the specified Wi-
Fi network. If the data entered is incorrect or the connection is
unsuccessful for any other reason, the device will return to access
point mode after around 10 minutes.
1. Choose "connect to Router"
2. Enter your network name (SSID)
3. Enter the wifi password
4. Press "Save"
Launch the browser on your device and go to url: chargebox.
garo.se and follow the instructions.
Note: your device needs to be connected to same network as the
GTB Twinbox
Note: If the data entered is incorrect or the connection is
unsuccessful for any other reason, the device will return to access
point mode after around 10 minutes.
Connect GTB Twinbox to a local network via ethernet
with DHCP
The GTB Twinbox will attempt to get an IP address from the local
DHCP server.
1. Choose "Ethernet" and "Obtain IP automatically"
2. Current IP address is visible
3. Press Save
Launch the browser on your device and go to url: chargebox.
garo.se and follow the instructions.
Note: your device needs to be connected to same network as the
GTB Twinbox
EN
USER MANUAL
Connect GTB Twinbox to a local network via ethernet
using static IP-adress
The GTB Twinbox will attempt to connect to the local network
using a static IP-address.
1. Choose "Ethernet" and "Static IP"
2. Enter the IP address, Netmask and Gateway information
3. Press Save
Launch the browser on your device and go to url: chargebox.
garo.se and follow the instructions.
Note: your device needs to be connected to same network as the
GTB Twinbox

Factory reset of Network settings

By pressing the SW3 on CC2 for >3s, you will reset the network
settings to default AP (access point) mode. See picture 24. See
SSID and password information inside the front door.
30
(picture 24)