GARO Twinbox GTB Series Assembly Instructions / End User Instruction page 7

Note: Wall installation of GTB Twinbox requires a minimum
20mm distance between the wall and the GTB Twinbox to ensure
correct cooling, see picture 3.
When GTB twinbox is installed on a pole, the holes at the back
side of the GTB Twinbox should be covered/closed by attached
screws, see picture 6.
(picture 3)
(picture 5)
EN
INSTALLATION OF STANDALONE GTB TWINBOX
2x M8xL20mm + Nut + Washer
2xM8 L20 + 2xM8 Nut + Washer
6x M6 Nut + Washer
6xM6 L40mm
7
(picture 4) 2xM6
(picture 6)
3xM6 L12mm