About This Manual; Information; Warnings - GARO Twinbox GTB Series Assembly Instructions / End User Instruction

About this manual

This document contains general descriptions which are verified to be accurate at the time of printing. However, because continuous
improvement is a goal at GARO, we reserve the right to make product and software modifications at any time. This range is subject to
continual product development. Errors, typo and omissions excepted.
Latest manual can always be found at http://garoemobility.com/support

INFORMATION

GARO GTB assortment is a range of EVSE stations for Mode-3
AC charging.
Below are some example of standard features:
• Double outlets or cables for Mode-3 EV charging.
• Up to 2x22kW simultaneous charging from one EVSE
depending on model.
• RCCB with DC-fault monitoring for each side.
• Internal static DLM (Dynamic Load Management).
• Remote control function for activated charging.
• Double mains terminals for easy forwarding of mains cable to
next GTB.
• Suitable for installation on wall or pole.
• LED status indication.
• Upgradeable firmware
Some models also have:
• Energy meters for each side
• Communication module for Wifi/LAN functions
• RFID readers
General functions:
• Install and administrate RFID readers
• Connect mobile/tablet/PC to webinterface
• Activate scheduled charging via webinterface
• Schedule for electric current limitation via webinterface
• Install external energy-meter for advanced DLM
• Connect up to 16pcs GTB in a cluster for advanced DLM
• Update firmware via webinterface
Some functions require specific installed hardware ie
communication module.
For full user manual: www.garoemobility.com/support
EN
INFORMATION

Warnings

Dielectric Voltage Withstand Test is not allowed on GTB
Twinbox
This equipment should not be used by anyone (including
children) with reduced physical, sensory or mental
capacity, or anyone lacking in experience or knowledge,
unless they are provided with supervision or prior
instruction in how to use the equipment by the person
responsible for their safety.
The GTB Twinbox range of charging stations is designed
exclusively for charging electric vehicles.
The GTB Twinbox must be grounded according to local
country installation requirements.
Do not install or use the GTB Twinbox near flammable,
explosive, harsh, or combustible materials, chemicals, or
vapors.
Turn off the electrical power at the circuit breaker before
installing, configuring or cleaning of the GTB Twinbox.
Use the GTB Twinbox only within the specified
parameters.
Never spray water or any other liquid directly at the GTB
Twinbox. Never spray any liquid onto the charge handle
or submerge the charge handle in liquid. Store the charge
handle in the dock to prevent unnecessary exposure to
contamination or moisture.
Do not use this equipment if it appears to be damaged or
if the charging cable appears to be damaged.
Do not modify the equipment installation or any part of the
product.
Do not touch the terminals with fingers or any other
objects.
Do not insert foreign objects into any part of the GTB
Twinbox.
3