Braun VISTA Series Installation & Service Manual page 72

Removal, Installation,
Pump Handle
Decal #29052
Rotate
Actual Size: 1-5/16" Wide x 5/8" Tall
Manual Instructions,
Hand Pump, Vista
Decal #29082
MANUAL OPERATION
TO REMOVE PUMP HANDLE:
1. Rotate top clip. LOCK
Using hand pump handle:
TO UNFOLD PLATFORM (OUT):
1. Close hand pump valve
(turn clockwise).
2. Insert handle in pump and
stroke until platform folds
fully (stops).
3. Open hand pump valve (turn
counterclockwise) until
platform reaches floor level.
Open 1/2 turn only.
4. Close hand pump valve
VALVE
(turn clockwise).
DOWN (TO LOWER):
Open hand pump valve (turn
counterclockwise). Open
OPEN
1/2 turn only.
UP (TO RAISE):
CLOSE
1. Close hand pump valve
(turn clockwise).
2. Insert handle in pump and
stroke until platform reaches
floor level.
TO FOLD PLATFORM (IN):
Insert handle in pump and stroke.
Note: Close valve before operating
electric pump.
TO STORE PUMP HANDLE:
1. Insert bottom of handle
behind bottom clip.
2. Rotate clip to lock.
29082
Actual Size: 4-1/2" Wide x 8-1/2" Tall
Hydraulic Pressure
Switch Adjustment
Decal #27154
W ARNING
Improper hydraulic
pressure switch
adjustment may result
in serious bodily injury
and/or property damage.
HYDRAULIC
PRESSURE SWITCH
ADJUSTMENT
Adjust switch as specified
in installation/service
manual.
27154
Actual Size: 2-1/16" Wide x 5" Tall
Decals and Antiskid
Lift-Posted Decals
Removal Instruction,
Pump Cover
Decal #29051
MANUAL
OPERATION
Turn wing Lock
1/4 turn for
hand pump
Unlock
access.
29051
Actual Size:
2-1/2" Wide x 2-1/4" Tall
Microswitch Adjustment Instructions
Unfold/Down (Outside) Microswitch
Turn adjustment bolt clockwise to stop
platform unfold function sooner. Turn
adjustment bolt counterclockwise to allow
platform to unfold further.
Up/Fold (Inside) Microswitch
Turn adjustment bolt counterclockwise
to stop platform raise function sooner.
Turn adjustment bolt clockwise to allow
platform to raise further.
24490
The Braun Corporation certifies that
this wheelchair lift conforms to all
applicable requirements of the National
Standards for School Buses in effect at
the time of its manufacture. 24668
WARNING
Lift installation and servicing prohibited by
anyone who has not been certified by The Braun
Corporation Sales and Service School. Certified
service technicians should call 1-800-THE LIFT
to receive applicable installation/service manual.
Failure to follow this policy may result in serious
bodily injury and/or property damage.
25675
NSSB Lift Certification
Decal #24668
The Braun Corporation certifies that
this wheelchair lift conforms to all
applicable requirements of the National
Standards for School Buses in effect at
the time of its manufacture.
Installation and Service
Manual Policy Warning
Decal #25675
Lift installation and servicing prohibited by
anyone who has not been certified by The Braun
Corporation Sales and Service School. Certified
service technicians should call 1-800-THE LIFT
to receive applicable installation/service manual.
Failure to follow this policy may result in serious
bodily injury and/or property damage.
Microswitch Adjustment Instructions
Microswitch
Unfold/Down (Outside) Microswitch
Turn adjustment bolt clockwise to stop
Adjustment
platform unfold function sooner. Turn
adjustment bolt counterclockwise to allow
platform to unfold further.
Instructions
Decal #24490 Up/Fold (Inside) Microswitch
Turn adjustment bolt counterclockwise
to stop platform raise function sooner.
Turn adjustment bolt clockwise to allow
platform to raise further.
W ARNING
Contact The Braun
Corporation before
adjusting hydraulic
pressure relief
valve. Failure to
Warning, Relief
do so may result
in serious bodily
Valve Adjustment
injury and/or
Decal #22249
property damage.
24668
Actual Size:
2-3/4" W. x 1" T.
W ARNING
25675
Actual Size:
4" Wide x 2" Tall
Actual Size:
2-1/4" Wide
x
2" Tall
24490
Actual Size:
1-5/8" Wide
x
2-1/4" Tall
22249
Page 59