Braun VISTA Series Installation & Service Manual page 16

Installation/Service Safety Precautions
Installation/Service Safety Precautions
Adjust platform angle and floor level positioning of bridge plates and inboard roll stops as
W ARNING
detailed in this manual before operating lift with passenger.
W ARNING
When adjusting platform cables, there must be a minimum 10 turn thread engagement
at both ends of turnbuckle.
W ARNING
Meet all lift positioning and clearance specifications as detailed in the Positioning and
Clearance Checklist before operating lift with passenger.
W ARNING
Maintenance and repairs must be performed only by authorized service personnel.
W ARNING
Perform maintenance and lubrication procedures exactly as outlined in the Maintenance
and Lubrication Schedule contained in this manual.
W ARNING
Disconnect the power cable at the battery prior to servicing.
W ARNING
Keep hands, arms and all other body parts clear of moving parts.
W ARNING
Never modify (alter) a Braun Corporation lift.
W ARNING
Replacement parts must be Braun authorized replacements.
W ARNING
Never install screws or fasteners (other than factory equipped).
W ARNING
Whenever replacing a hydraulic cylinder or seals, lower platform fully.
W ARNING
The lift owner's (operators) manual must be in the lift-mounted manual storage pouch
when the consumer receives the lift.
W ARNING
Failure to follow these safety precautions may result in serious bodily injury and/or prop-
erty damage.
Page 5