Braun VISTA Series Installation & Service Manual page 25

2
Lift Securement (continued)
Underfloor Reinforcement Brackets (continued)
Two base plate mounting bolts must secure
each bracket.
Underfloor reinforcement brackets must reach
and overlap the nearest subframe member
flange (see Figures J and K). Cut the "L" bars to
length.
Vehicle
Subframe
W ARNING
Check for obstruc-
tions such as gas
lines, wires, exhaust,
etc. before drilling or
cutting. Failure to do
so may result in
serious bodily injury
and/or property
damage.
Page 14
Lift Installation Instructions
Underfloor
Reinforcement
Bracket
Floor
Vehicle
Subframe
Technical Assistance: If the reinforcement brack-
ets will not work as detailed for your particular
installation, call 1-800-THE LIFT for technical
assistance. If the base plate mounting holes cannot
be used in your application, call for technical assis-
tance. Underfloor vehicle configuration data is
available for Ford, Chevy/GMC and Dodge vans
(not available for all applications).
Figure K
Underfloor reinforcement brackets
must reach and overlap nearest
subframe member flange.
Underfloor
Reinforcement
Bracket