Defining Partitions - Visonic POWERMAX PRO Installer's Manual

P1 RDY 00:00
NORMAL MODE
USER SETTINGS
INSTALLER MODE
ENTER CODE
[installer code]
1. NEW INSTL CODE
2. ENROLLING
3. DEFINE ZONES
4. DEFINE PANEL
5. DEFINE COMM
6. DEFINE GSM
7. DEFINE PWRLNK
8. DEFINE OUTPUTS
9. DEFINE VOICE
10. DIAGNOSTICS
11. USER SETTINGS
12. FACTORY DEFLT
13. SERIAL NUMBER
14. START UL/DL
15. PARTITIONING
16. SHOW LOG
<OK> TO EXIT

4.15 DEFINING PARTITIONS

This mode allows you to enable/disable the partition
Partitioning allows you to divide the system into
feature.
a maximum of four independently controllable areas.
A different user code is assigned to each partition
order to limit or control access to each area
can also be armed or disarmed regardless of the status of
the other partitions within the system
When the partition feature is disabled, zones, user codes
and features will operate the same as in a regular
PowerMax Pro unit. When partition is enabled, menu
displays are changed to incorporate the partition feature.
DE5468IP
Displayed during
dialing process
Displayed during
download process
Download
Displayed for half
a minute approx.
accompanied by happy
(success) melody
Figure 4.14 – Start UL/DL
. A partition
If UL/DL server
tel. # is already
defined (see
par. 4.5.34)
COMMUNICATING
Dialing
OK
DOWNLOADING
OK
DOWNLOAD OK
P1 RDY 00:00
NORMAL MODE
in
USER SETTINGS
INSTALLER MODE
ENTER CODE
[inst. code]
1. NEW INSTL CODE
15. PARTITIONING
16. SHOW LOG
<OK> TO EXIT
If UL/DL server
tel. # was not
defined before
(see par. 4.5.34)
TEL # NOT DEFINED
accompanied by sad
Dialing
failed
DIAL ATTEMPT FAIL
accompanied by sad
Download
failed
DOWNLOAD FAILED
accompanied by sad
(Display when partition
is enabled)
enable
disable
Figure 4.15 – Partitioning
Displayed for half
a minute approx.
(failure) melody
Displayed for half
a minute approx.
(failure) melody
Displayed for half
a minute approx.
(failure) melody
27