Defining Powerlink; Scheduler Function; Installer Mode - Visonic PowerMax User Manual

USER SETTINGS

Defining PowerLink

This mode enables
PowerLink (PowerMax+
controller) and to enable/disable PowerLink failure
reporting.
A. PowerLink Enrolling:
Having entered your Master User Code successfully
(see above - Entering the User Settings Menu), click
NEXT button (repeatedly, if necessary) until the
display will read DEFINE PWRLNK.
From here, proceed as follows:
PRESS RESULTANT DISPLAY
1. INSTALL
<OK> to install
1. INSTALL
Enrolling success is indicated by short beeps and
failure is indicated by long beep.
You may now select any other item on the USER
SETTINGS menu or quit programming by clicking
<AWAY>. When <OK> TO EXIT is displayed - click
<OK>.
B. PowerLink Deleting:
The process is simillar to "PowerLink Enroling" but:
Instead "<OK> to install", the display is "<OFF> to
delete". When it is displayed, click the OFF button.
C. PowerLink failure reporting Enabling :
Having entered your Master User Code successfully
(see above - Entering the User Settings Menu), click
NEXT button (repeatedly, if necessary) until the
display will read DEFINE PWRLNK.
From here, proceed as follows:
PRESS RESULTANT DISPLAY
1. INSTALL
2. PWRLNK FAILURE
disable report
report
report
2. PWRLNK FAILURE
Reporting enabling success is indicated by short
beeps and failure is indicated by long beep.
30
you to enroll/delete
Web based remote
You may now select any other item on the USER
the
SETTINGS menu or quit programming by clicking
<AWAY>. When <OK> TO EXIT is displayed - click
<OK>.
D. PowerLink failure reporting Disabling:
Having entered your Master User Code successfully
(see above - Entering the User Settings Menu), click
NEXT button (repeatedly, if necessary) until the
display will read DEFINE PWRLNK.
PRESS
You may now select any other item on the USER
SETTINGS menu or quit programming by clicking
<AWAY>. When <OK> TO EXIT is displayed - click
<OK>.

Scheduler Function

The Scheduler enables to start and stop activity of
the desired devices. You can select the day (Sunday,
Monday, Tuesday, Wednesday, Thursday, Friday,
Saturday, or daily) and then select the scheduled
activity start/stop of the desired device. The process
is demonstrated in "figure 8 DETAIL A".

Installer Mode

If the feature USER PERMIT was enabled by the
system installer, the installer will be able to access
the INSTALLER MODE only by using this menu,
meaning that the INSTALLER MODE (described in
the installer guide) can be accessed only with user
permission (by using the user code).
RESULTANT DISPLAY
1. INSTALL
2. PWRLNK FAILURE
report
disable report
disable report
2. PWRLNK FAILURE
DE5467U