Husqvarna P 535HX Operator's Manual page 7

Display overview
The display shows the status of the product. When an
indication light comes on, an information box will show
1 2
24
23
22
21
1. Time, language and system menu. This symbol
shows on the display when the product is stationary
for more than 6 seconds.
2. Gauge for the electrical drive
3. Automatic parking brake indicator (Green) / Manual
parking brake indicator (Red)
4. Work light or high beam light indicator
5. Speed in km/h when in operation / Total operation
time when in idle position
6. Clock
7. Hour meter
®
8. Bluetooth indicator
9. Service indicator
10. Gauge for the PTO speed
11. Screen brightness adjustment. This symbol shows
on the display when the product is stationary for
more than 6 seconds.
12. Generator fault indicator
13. Engine temperature indicator
14. Battery indicator, 12 V
15. Oil pressure indicator
16. Fuel level status, %
17. Fuel level status, bar
18. Fuel level indicator
19. PTO button indicator, engaged/disengaged
20. Battery level status, %
1262 - 004 - 04.06.2020
3 4 5
20
with information and instructions. Also refer to
Troubleshooting on page 58 .
6 7 8
19 18 17
21. Battery level status, bar
22. Battery level indicator, 48 V
23. Battery temperature indicator
24. Operator presence control (OPC)
Display guides and gauges
A
B
• (A): The blue field in the guide is the charge and the
upper half of the guide is the discharge.
• (B): The charge or discharge from the 48 V batteries.
The batteries charge when the indication is in the
lower half of the gauge.
• (C): The green field in the guide shows the
recommended PTO speed. If the load is to high, the
Display -
10 11
9
D
12
13
14
15
16
C
7