Husqvarna P 535HX Operator's Manual page 31

To set the time on the display
1. Push the symbol for time, language and system on
the display.
2. Push the time symbol.
3. Push the "+" or "-" to set the hours and minutes.
To select language
1. Push the symbol for time, language and system on
the display.
2. Push the language symbol.
3. Push a language.
To see system information and to do a factory reset
1. Push the symbol for time, language and system on
the display.
2. Push the symbol for system information.
3. Push "factory reset" to reset time and language.
To adjust the brightness of the display
1. Push the brightness symbol on the display.
2. Push the "+" or "-" to adjust the brightness of the
display.
1262 - 004 - 04.06.2020
To connect the power supply
(accessory)
WARNING: An incorrectly used, broken or a
defective power supply can cause an
electrical shock, overheating or battery
leakage. Regularly examine that the power
supply and the batteries are not damaged.
CAUTION: Do not use the power supply in
conditions where temperatures are below
0°C or above 40°C.
• Connect the power supply to a grounded mains
socket and to the product.
To fill fuel
WARNING: Diesel fuel is very flammable.
Be careful and refuel outdoors. Refer to
safety on page 20 .
WARNING: Do not use the fuel tank as a
support area.
CAUTION: Incorrect type of fuel can result in
engine damage.
• To agree with the emission regulations, the diesel
fuel needs to agree with the standard EN590 or
ASTM D975 and have a Sulphur content of less than
500ppm or 0,05% of weight. Refer to the Kubota
Operators Manual for further information regarding
fuel quality.
• Use diesel fuel with a minimum cetane rating of 45.
Do not use diesel fuel that has a RME mix that
contains more than 5% in mineral oil-based fuels.
Note: It is necessary to use fuel for cold weather if
the temperature is below 0°C / +32°F. Speak to your
Husqvarna servicing dealer for more information.
Fuel
31