Husqvarna P 535HX Operator's Manual page 43

CAUTION: Do not use a high-pressure
washer or a steam cleaner. Water can go
into bearings and electrical connections and
cause damage to the product.
Clean the product after use. Let the product cool down
before you clean it.
• Before you clean the product with a wet cloth, clean
the product with a soft brush or compressed air.
Remove grass cuttings and dirt on and around the
transmission.
• Use a wet cloth to clean the product. Clean plastic
parts with a clean and dry cloth.
• Do not use water or detergents near electrical
components or bearings. Liquids can cause damage
to the electrical components and bearings.
• To clean the cutting deck, put the cutting deck in
service position, if possible, and hose it down with
water.
• When the product is clean, start the cutting deck for
a short period to remove the remaining water.
To clean the cold air intakes
CAUTION: Clean the cold air intakes daily or
more frequently if necessary. A blocked cold
air intake can make the product become too
hot.
To clean the cold air intake of the battery
cooling system
• Make sure that the cold air intake grille is not
blocked. Remove grass and dirt with a soft brush.
1262 - 004 - 04.06.2020
To clean the cold air intake of the right side
cover
• Make sure that the cold air intake grille is not
blocked. Remove grass and dirt with a soft brush.
To clean the cold air intake of the engine
• Make sure that the cold air intake grille is not
blocked. Remove grass and dirt with a soft brush.
To clean the battery cooling system
1. Remove the cover to the battery cooling system.
To remove the cover of the battery cooling
Refer to
system on page 44 .
2. Use compressed air to clean the cooling fins and the
filters on the sides of the cover.
To clean the engine and the muffler
Keep the engine and muffler free from grass cuttings
and dirt. Grass cuttings soaked in fuel or oil on the
engine can increase the fire risk and the risk that the
engine becomes too hot. Let the engine cool before it is
cleaned. Clean with water and a brush.
Grass cuttings around the muffler dry quickly and are a
fire risk. Use a brush or remove the grass cuttings with
water when the muffler is cold.
43