Replacing A Ups5000-E Battery - Huawei FusionModule 1000B Maintenance Manual

FusionModule1000B Air-Cooled IT Solution
Maintenance Guide
Figure 6-3 Detecting the voltages
Step 4 Hold down the faulty SPD module and pull it out.
Figure 6-4 Replacing an SPD module
Step 5 Install the spare SPD module, and switch on the SPD module circuit breaker.
Step 6 Reinstall the protective panel.
----End
Follow-up Procedure
Dispose of the removed SPD module that is confirmed faulty.

6.1.4 Replacing a UPS5000-E Battery

Prerequisites


Issue 02 (2017-01-10)
 If there is a faulty SPD module, it is recommended that all SPD modules be replaced.
 If the SPD module cannot be pulled out, use a tool such as a flat-head screwdriver to lever it out.
A UPS5000-E battery needs to be replaced.
A spare UPS5000-E battery of the same model is available and functional.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
81