Table of Contents
Advertisement
FusionModule1000B Air-Cooled IT Solution
Maintenance Guide
Figure 6-50 Removing the cover
Step 3 Remove the two cables using a Phillips screwdriver.
While removing cables, label the cables with its corresponding terminal ports for later connection.
Step 4 Remove screws from the horn strobe using a Phillips screwdriver, and remove the base.
Step 5 Reconnect cables in the same way.
Figure 6-51 Connecting cables
Connect the black wire to the leftmost binding post, and connect the red wire to the middle binding post.
Step 6 Install the new horn strobe base in the same way and tighten the screws.
Step 7 Reinstall the cover in the same way and tighten the screws.
Issue 02 (2017-01-10)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
135
Advertisement
Table of Contents
