Routine Maintenance; Paint Repair - Huawei FusionModule 1000B Maintenance Manual

FusionModule1000B Air-Cooled IT Solution
Maintenance Guide

4.1 Paint Repair

Prerequisites


Context
The FusionModule1000 container exterior should be intact. If the container surface is bumped,
scratched, or rusted, the paint should be repaired.
Table 4-1 Paint repair
Paint Damage
Slight scratch (steel
base material not
exposed)
Smudges and rust
that cannot be wiped
off
Deep scratch
(primer damaged,
steel base material
exposed)
Issue 02 (2017-01-10)
The outdoor area without shelters is not subject to bad weather conditions such as raining,
sandstorm, strong wind, or snowing during paint repair.
You have prepared the required paint that matches the color palette delivered with
equipment.
Check the damage to the container paint and prepare appropriate tools and materials. The number of
materials depends on site requirements.
Tools and
Materials
Spray paint or paint,
brush (required for
repainting a small
area), fine
sandpaper,
anhydrous alcohol,
cotton cloth,
painting gun
(required for
repainting a large
area)
Spray paint or paint,
zinc-rich primer,
brush (required for
repainting a small
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4

Routine Maintenance

Procedure
Steps 1, 2, and 4
Steps 1, 2, 3, and 4
4 Routine Maintenance
Description
1. For the color of
the finish coat
(acrylic acid
paint), see the
delivered color
palette and
pantone No.
specified on it.
2. For a few
smudges,
scratches or
rusts, Huawei
recommends
manual paint
spraying or paint
brushing.
16