FusionModule1000B Air-Cooled IT Solution
Maintenance Guide
Step 4 (Optional) After the fault is rectified, replace by following instructions in
an Emergency Door Release
----End
Follow-up Procedure
Analyze the cause of the fault, and work out and record the preventive measures.
7.9 Emergency Operations for Container Door Open
Prerequisites
A door open alarm is generated for the FusionModule1000.
Procedure
Step 1 Locate the door based on the alarm information.
Step 2 Enter the container, verify that no device is lost and the system is working properly. Then
close the container door.
Step 3 Check whether the alarm is cleared.
----End
Follow-up Procedure
Analyze the cause of the fault, and work out and record the preventive measures.
7.10 Emergency Operations for an Early Fire Alarm
Prerequisites
The VESDA has generated a fire alarm.
Issue 02 (2017-01-10)
The access controller is faulty. Replace by following instructions in
Controller.
If yes, no further action is required.
If no, go to
5.6 Door Sensor
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Button.
Alarms.
7 Emergency Operations
6.3.13.6 Replacing an Access
6.3.13.4 Replacing
187