Replacing A Water Sensor (Point Type) - Huawei FusionModule 1000B Maintenance Manual

FusionModule1000B Air-Cooled IT Solution
Maintenance Guide

6.3.2 Replacing a Water Sensor (Point Type)

Prerequisites


Impact on the System
None
Preparations
Tools: Phillips screwdriver, protective gloves
Materials: spare water temperature sensor
Documents: monitoring device layout, management system initial configuration table
Skill requirement: weak-current engineer
Procedure
Step 1 Locate the water sensor to be replaced based on the alarm information on the monitoring
software terminal.
Figure 6-14 Point-type water sensor
Step 2 Remove the captive screws from the faulty water sensor using a Phillips screwdriver, and
remove the water sensor.
Issue 02 (2017-01-10)
A water sensor needs to be replaced.
Spare water sensors of the same model are available and functional.
For the diagrams and tables, see the initial configuration parameter manual for the solution in use.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
97