Tracking My Swimming Sessions; Using The Stopwatch And Timer - Withings ScanWatch Series Installation And Operating Instructions Manual

Tracking my swimming sessions

All you have to do is wear your ScanWatch while swimming. It will automatically
detect that you're swimming and track your swim without any action required on
your part.
A few requisites:
• You have to swim continuously for longer than 10 minutes.
• Only swimming activity is tracked. Other exercises performed in the pool, such
as water aerobics, are not tracked.
• You have to be regular in your movements. For example, your swimming can
be impacted if the pool is too crowded, which could, in turn, impact your
results.
To accommodate most users, our algorithm works best with breaststroke and
crawl. Also, swim detection has been calibrated in 25 meters and 50 meter-wide
pools. As such, your swim data may not be accurate if you swim in a smaller pool.
Once you're done swimming, the Health Mate app will let you know how long
your session was and how many calories you've burned. Calories are computed
based on the duration of your swimming session, on your personal data, and on
the intensity of movement.

Using the stopwatch and timer

ScanWatch features a stopwatch and a timer: they can both be activated in
the Clock menu of your ScanWatch.
To do so, press the side button and scroll to the Clock menu. Select the
Clock menu and scroll to the stopwatch or timer. Then press and hold the button
to stop the measurement.
ScanWatch
v1.0 | August, 2020
EN - 4 4