Withings ScanWatch Series Installation And Operating Instructions Manual page 51

9. Tap the back button to confirm.
Note that you can set up to three alarms on your ScanWatch.
Disabling the alarm
1. Open the Health Mate app.
2. Go to Devices.
3. Tap ScanWatch > Upcoming alarm.
4. Place ScanWatch close enough to your mobile device.
5. Tap the Alarm toggle to disable the alarm.
6. Tap the back arrow at the top left of the screen.
Your alarm is disabled.
Snooze feature
When your ScanWatch vibrates, simply long-press the button to postpone the
alarm for 10 minutes.
Stopping the alarm
You can stop the alarm by pressing the button of your ScanWatch. It will stop
right away instead of vibrating 12 times before stopping on its own.
ScanWatch
EN - 51
v1.0 | August, 2020