Calibrating The Hands - Withings ScanWatch Series Installation And Operating Instructions Manual

5. Put the wristband in place while pulling the knob to the left side.
6. Release the knob.
The wristband is now properly attached to your ScanWatch.
7. Repeat the previous steps for the other side.

Calibrating the hands

If you ever feel that the time displayed on your ScanWatch is incorrect, you may
need to recalibrate the hands. To do so, perform the following steps:
1. Open the Health Mate app.
2. Go to Devices > ScanWatch.
3. Tap Set the time.
Make sure that your ScanWatch is placed close enough to your mobile device.
ScanWatch
v1.0 | August, 2020
EN - 89