Withings ScanWatch Series Installation And Operating Instructions Manual page 71

Watch positioning
1. Place your watch on your non-dominant wrist, 1 cm from the wrist bone.
2. Make sure that your ScanWatch is not loose on your wrist. Tighten the band
until it is snug but comfortable. When the watch moves, your skin should move
along with it.
3. Wearing the watch closer to the elbow can help you to obtain a better fit.
How to perform an accurate SpO2 measurement
1. Make sure to wear the watch at least 3 to 4 minutes before the measurement.
2. Make sure you have been resting for at least 10 minutes after your last workout
session.
3. Rest your arm on a table, with the hand relaxed and in an open position.
4. Press the side button of the watch and scroll to the SpO2 mode. Press the
button to select the SpO2 mode.
ScanWatch
v1.0 | August, 2020
EN - 71