Recording My Electrocardiogram (Ecg) - Withings ScanWatch Series Installation And Operating Instructions Manual

Can ScanWatch record my QT interval?
ScanWatch is soon-to-be FDA cleared and regulated to detect and display only
the following: beats per minute, normal sinus rhythms and atrial fibrillation. When
you record an electrocardiogram, QRS, PR, QT and QTc durations appear on the
ECG pdf report that you can share.
Can ScanWatch detect arrhythmias other than AFib?
ScanWatch, which is soon to be cleared by the FDA, has algorithms that can
provide the following ECG results: normal, atrial fibrillation, low heart rate or
high heart rate. As a medical device, ScanWatch will not be cleared to detect
or communicate any other results, rhythms, or arrhythmias. However, the watch
records a single-lead ECG. Therefore, any arrhythmia that appears on this type of
ECG is likely to appear on the ECG recorded by your watch. You may present this
recording to a specialist for diagnosis.

Recording my electrocardiogram (ECG)

To record your ECG, perform the following steps:
1. Make sure ScanWatch is snug on the wrist you selected in the Health Mate
app. To do so, go to Devices > ScanWatch > More settings > ECG.
2. Press the side button of the watch and scroll to the ECG mode. Press the
button to select the ECG mode.
ScanWatch
v1.0 | August, 2020
EN - 57