Safety Instructions; Use And Storage; Water Resistance - Withings ScanWatch Series Installation And Operating Instructions Manual

Safety instructions

Use and storage

• Your ScanWatch is designed to work in ambient temperatures between
5°C and 40°C (41°F and 104°F) and humidity range of 20% to 90% relative
humidity.
• Your ScanWatch may be stored in a clean, dry location between -25°C and
70°C (-13°F and 158°F) when not in use.
• Do not use ScanWatch if it is damaged. The use of a damaged device could
cause patient injury or equipment failure.
• Do not take recordings during a medical procedure (e.g., magnetic resonance
imaging, diathermy, lithotripsy, cautery, and external defibrillation procedures).
• Do not use ScanWatch to diagnose heart-related conditions.
• Do not use ScanWatch with a cardiac pacemaker, ICDs, or other implanted
electronic devices.
• Do not use ScanWatch to take a recording during physical activity.
• Avoid any extreme temperature changes (for instance sauna or steam room).
• Avoid any kind of shock, be it physical, thermal, or otherwise. They may
damage the internal and external components of your watch.
• Ensure that dust, sand, or other debris does not come into contact with the
watch button as it may cause the button to stick or become difficult to press
or rotate. If this occurs, rinse the watch in warm water for approximately 20
seconds and rotate the button forward and backward. Be sure not to press the
button while underwater. Then, allow the watch to fully dry using a lint-free
cloth.
• Avoid any exposure to cosmetics and substances like perfume or oil. They may
damage the overall appearance and quality of the watch.
• Keep the case of your ScanWatch away from any sharp or hard objects to
prevent any scratches.

Water resistance

Your ScanWatch can withstand a pressure similar to that of a 50 m (165 ft) depth.
You can, therefore, use it when dishwashing, splashing, or swimming. However, it
can't be used for diving or snorkeling.
We recommend you to read the information below before wearing your
ScanWatch.
• Do not press or rotate the side button of your watch when it is underwater
(for instance during water activity). The side button is not intended to be
rotated underwater.
• Avoid long exposure to saltwater. Make sure you rinse your watch with fresh
water after spending time swimming in salted water.
• Avoid exposure to any chemical products such as solvents, detergents,
ScanWatch
v1.0 | August, 2020
EN - 97