Assembly - Kemper Filter Master XL Series Operating Instructions Manual

KEMPER Filter-Master XL Operating Instructions - EN

5 Assembly

WARNING
Serious injury can be caused when mounting the exhaust arm as
a result of the pretensioning of the coil springs employed. In the
event of improper handling, the support frame may move
unexpectedly and cause severe facial injuries or crush fingers!
NOTE
When assembling the Filter-Master XL, the operator of the Filter-Master
XL may only entrust people who are familiar with this task.
Two people are needed to assemble the device.
It is important to ensure that the welding current feedback line shows a
low resistance between the workpiece and the welding machine and
that connections between the workpiece and the filter device are
avoided so that, if necessary, the welding current cannot flow back not
via the protective conductor of the filter unit to the welding machine.
- 61 –
Technical changes and errors excepted.