Instructions For Use - Otto Bock 1S101 Instructions For Use Manual

NOTICE
Contact with salt water or water containing chlorine/soap as well as
abrasive substances (e. g. sand)
Damage and premature product wear
► Following any contact with the substances identified above, promptly
clean the product.
NOTICE
Mechanical damage to the product
Change in or loss of functionality due to damage
► Use caution when working with the product.
► If the product is damaged, check it for proper function and readiness
for use.
► In case of changes in or loss of functionality, do not continue using the
product (see "Signs of changes in or loss of functionality during use" in
this section).
► Take any necessary measures (e.g. repair, replacement, inspection by
the manufacturer's customer service, etc.).
Signs of changes in or loss of functionality during use
Decreased forefoot resistance or changes in roll-over behaviour are notice­
able indications of loss of functionality.
4 Scope of delivery
Quantity
1
1
Spare parts/accessories (not included in the scope of delivery)
Fig. Item
2 1
2 2
3 –
4 –
– –
14
Designation
Foot adapter with screw connection
Connection plate
Ankle block (exoskeletal design)
Screw connection for ankle block
(exoskeletal design)
Ottobock special adhesive with
hardener
Designation

Instructions for use

Prosthetic foot
Reference number
2R8*, 2R31*, 2R54*
636W28 or 636W18 and
2R14
2K34=*
2Z22=M10
636W19