Otto Bock 1S101 Instructions For Use Manual page 12

Body weight [kg]
≤100
101 to 125
2 Intended use
2.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
2.2 Area of application
Our components perform optimally when paired with appropriate compon­
ents based upon weight and mobility grades identifiable by our MOBIS clas­
sification information and which have appropriate modular connectors.
The product is recommended for mobility grade 1 (indoor walk­
er) and mobility grade 2 (restricted outdoor walker).
m°
kg
• The maximum approved body weight is specified in the technical data
(see Page 19).
2.3 Environmental Conditions
Allowable Environmental Conditions
Temperature range for use: -10 °C to +60 °C (14 °F to 140 °F)
Allowable relative humidity 0 % to 90 %, non-condensing
Prohibited environmental conditions
Mechanical vibrations or impacts
Perspiration, urine, salt water, acids
Dust, sand, highly hygroscopic particles (e. g. talcum)
2.4 Service life
This product has been tested by the manufacturer with 2 million load cycles
according to ISO 22675. Depending on the patient's activity level, this cor­
responds to a service life of 2 to 3 years.
3 Safety
3.1 Explanation of warning symbols
Warning regarding possible risks of accident or injury.
CAUTION
12
Allowable foot adapters
Foot size [cm]
21 to 30
26 to 27
28 to 30
Reference number (foot adapter)
2R8=M10, 2R31=M10, 2R54=M10
2R8=M10, 2R31=M10
2R31=M10