Xerox Digital copier printers User Manual page 96

6
6-18 Color Calibration
3. Select the port connected to the densitometer in the Select Densitometer pop-up
menu.
4. Click Start.
5. Follow the on-screen instructions to measure patches.
For instructions, see "Measuring values with a DTP32 densitometer" on page 6-8.
6. When you are finished, click Accept.
You can save the measurements file so that you can use it again by choosing Export
from the Measurements menu. This saves the values in the Measurements file that you
can use later without having to remeasure by importing it.