6
6-17 Using the Fiery XJ Print Calibrator
2. If you want to use a different measurements file, choose Import from the
Measurements menu; if you do not want to change the file, go to the Target section.
3. When prompted, select the new measurements file to use and click OK.
T
O CREATE A MEASUREMENTS FILE TO BE IMPORTED
1. Connect the DTP32 densitometer to your Macintosh or PC.
2. Choose Densitometer from the Measurements menu.
Creating a measurements file from a densitometer connected to your PC is not
N
:
OTE
supported with Windows 3.x.
: