Table of Contents
Advertisement
4
4-4 Scanning Jobs
T
O SELECT OPTIONS AND COMPLETE THE SCAN
1. Drag the cursor to select the area of the prescan image that you want to acquire, or
enter the area to acquire in the Selection area.
In the Selection area, you can specify:
Units (inches, centimeters, picas, points, ciceros, or pixels)—Specify the ruler units
that appear around the preview image.
Width and Height—Enter the Width and Height of the area to scan. If you select an
area of the page with the selection marquee, its dimensions appear in these text boxes.
If you do not select a prescan area, the default is to acquire the entire scan.
You can use the selection marquee to select an area of the image that you want to
acquire, or you can acquire the entire image. When you select a portion of the image,
you can move the selection marquee around by positioning the pointer inside the
marquee and dragging the marquee to a new location. If you want to deselect the area
you have selected, click outside the selected area. Double-click to reselect the whole
scan.
You can change the size of the frame by clicking and dragging one of the handles on
the corners of the selection frame.
The Fiery SI scans at a maximum resolution that is dependent on the size of the
scanned area. For letter or A4 paper sizes, the maximum scan resolution is 200 dpi. For
an area that is roughly one-fourth the size of letter/A4, the maximum scan resolution is
400 dpi. If you select a size in this range, you can type a resolution of up to 400 in the
dialog box.
2. If you want to change any options, click Options to display the Scan Options dialog
box. Click OK when you are finished.
:
Advertisement
Table of Contents
