Xerox Digital copier printers User Manual page 21

1
1-6 Operating the Fiery SI
Suspend Printing
Resume Printing
Run Diagnostics
Reboot Server
Suspend communication between the Fiery SI and the
copier. You can suspend printing if you want to interrupt
the current Fiery SI job so that you can use the copier to
make copies. Jobs continue to process on the Fiery SI and
after you make the copies, you can select
and the copier will continue printing jobs.
Resume communication between the copier and the
Fiery SI after you have finished making copies.
This command is provided for service representatives. Use
the line selection buttons to select the diagnostic test you
want to run and choose OK
service/support technician for information about these
diagnostics.
Shut down all Fiery SI activity in the correct manner and
then restart. You should use this option instead of the
switch on the rear of the Fiery SI.
Resume Printing
. Contact your authorized