Xerox Digital copier printers User Manual page 61

5
5-8 Managing Print Jobs
You cannot use the Fiery XJ Downloader to download TrueType fonts.
If you are using TrueType fonts in Windows, you can print them by converting
N :
OTE
them to Adobe Type 1 fonts. To do this with the Adobe PostScript printer driver, click
the Fonts tab and select Send TrueType Fonts to This Printer as Type 1. To do this
with the Windows 3.x printer driver, set the Send to Printer as Adobe Type 1
command in the Advanced Options dialog box. To do this with the Windows 95
printer driver, click the Fonts tab and select Always use built-in printer fonts instead
of True Type fonts.
Printer fonts and Macintosh screen fonts
Like all PostScript fonts, the fonts included with the Fiery SI come in two forms:
printer fonts and screen fonts. The printer fonts are installed permanently on the
Fiery SI's hard disk. The screen fonts, which are included with the Fiery SI, should be
installed on your Macintosh. If you are using these fonts in documents you print on a
LaserWriter, they are probably already installed. If not, you'll need to install them
yourself. See Getting Started for instructions.
Occasionally, you may want to use PostScript (Macintosh) or Adobe Type 1
(Windows) fonts that are not included with the Fiery SI. If so, you'll need to install
both the screen fonts and the printer fonts on your computer. To do this, follow the
instructions from the font manufacturer.