Xerox Digital copier printers User Manual page 101

6
6-23 Using the Fiery XJ Print Calibrator
You can use this dialog box to view measured or target curves or to edit calibration
curves. The graph on the left side of the window allows you to view and manipulate
color output values; the areas on the right allow you to adjust other values. The View
Channels and View Curves areas specify which curves display on the graph.
2. In the View Channels area, verify that the channels you want to edit are selected.
You can view the channels for all four color channels (Cyan, Magenta, Yellow, and
Black), or in any combination. This aids in fine tuning edits and when editing curves
on a monochrome screen.
If all channels are turned on initially, they may overlap so you will have to move
N :
OTE
or turn off the topmost channel to see other channels.
3. In the View Curves area, verify that the curves you want to edit are selected.
Choose Target/Measured to view the target or measured curve; choose Custom to view
and edit the calibration curves. If you selected Target/Measured, you can use the check
boxes to specify whether to view Target, Measured, or both curves.