Testing And Applying Calibration - Xerox Digital copier printers User Manual

6
6-30 Color Calibration
6. When you are finished, click Save Target and enter a name for the new target.
This saves the target file to your Macintosh or PC hard disk so that you can use it again
or continue editing it later.
If you edited one of the press standard targets, make sure that you include the
N :
OTE
original standard name (SWOP, DIC, Linear, or Euroscale) in the new target name.
This ensures that the correct information appears on the Calibrator Test Page.

Testing and applying calibration

You can view a sample of calibration before you apply it to your Fiery SI. You can
print:
• Calibrator Test Page—This page is provided with Fiery XJ Print Calibrator and
shows a comparison of uncalibrated and calibrated data.
• User defined CALIB.EPS in Hold Queue— You can create an Encapsulated
PostScript (EPS) file in any application and name it CALIB.EPS. Then print the file
to the Hold Queue of the Fiery SI from your application or save it as an EPS file and
download it to the Hold Queue with the Fiery XJ Downloader.