Xerox Digital copier printers User Manual page 116

A
A-3 Error Messages
Replace waste bottle
Reset copier & XJ
Sorter limit exceeded
Sorter problem
Unknown error
Warming Up
The copier waste toner container is full of used toner.
Replace the container with a new one according to the
instructions in your copier manual. The Fiery SI will
resume printing when you have replaced the waste toner
container.
Press the button on the copier and then select the
Reset
option in the Functions menu to reset the
Reboot Server
copier and Fiery SI.
The sorter is full. You must remove the paper in the sorter
before continuing the job.
There is a problem with the copier's sorter. See the copier
console for instructions.
An error occurred with the copier. See the copier message
panel for information.
The copier is powering up. It will be ready for printing in
a few minutes.