Xerox Digital copier printers User Manual page 20

1
1-5 Using the Control Panel
Functions menu
You can choose the following commands from this menu:
Choose:
Print Pages
To do this:
Print special pages from the Fiery SI. You can print the
following pages from the submenu that appears:
—A test page enables you to confirm that the
Test Page
Fiery SI is properly connected to the copier and provides
color and grayscale samples to troubleshoot problems with
the copier or the Fiery SI. The following information is
listed: Server Name, Printer Model, Color Mode,
Calibration, Target, Color Rendering , and Date and Time
printed.
Configuration —Prints the Configuration page, which
gives the current server and device configuration. This
page lists general information about the hardware and
software configuration of the Fiery SI, the current options
for all Setup settings, information about the current
calibration, and the ethernet and token ring addresses (if
applicable) of the Fiery SI.
—Prints a log of the last 55 jobs. For information
Job Log
on the fields in the Job Log and on printing it in other
forms, see "Using the Job Log" on page 5-22.
Prints the Control Panel Map, which
Control Panel Map—
is an overview of the screens you can access from the
Control Panel. For information about using these screens
to set up the Fiery SI, see the Administrator Guide.
—Prints samples of the RGB, CMY, and
Color Charts
PANTONE colors available from the Fiery SI.
—Prints a list of all fonts resident on the hard
Font List
disk.