System Requirements For Windows Users; Networking Requirements - Xerox Digital copier printers User Manual

xiv Before You Begin

System requirements for Windows users

For installation of user software, you need A CD-ROM drive. This can be either an
internal CD-ROM drive in your PC or an external drive with the appropriate cable
and software to run on your computer.
To use the Fiery SI with an IBM PC or compatible, you need:
• An IBM PC or compatible with an 80386, 80486, or Pentium processor and at least
4MB of RAM
• A mouse that is supported by Windows
• MS-DOS version 5.0 or later
®
• Microsoft Windows version 3.1 or later, Windows 95, or Windows NT
• To use Fiery XJ Scan, Adobe Photoshop version 2.5 or later
• To print to the Fiery SI from Windows, you need to use a PostScript printer driver
and PostScript Printer Description (PPD) file. These drivers and PPD files are
included with the User Software. Use the Adobe PostScript Printer Driver for
Windows version 3.0.1 with Windows 3.1x. Use version 4.1 with Windows 95.
Windows 3.1x users can use the PostScript Printer Driver that came with the
Windows3.1 system software; however, all Fiery SI printing features will not be
available.
• To print from computers running Windows NT, you can use the PostScript driver
delivered with the operating system, and the Fiery SI PPD file provided with the
User Software.

Networking requirements

For network use with Windows 3.x, you need
• Farallon PhoneNET PC software version 3.1 or later (for AppleTalk) or
COPSTalk for Windows version 1.2f or later (for AppleTalk); or
SPX/IPX protocol (Novell), Ethernet, or Token Ring
For network use with Windows 95, you need
• TCP/IP networking protocol or
SPX/IPX networking protocol (Novell)
For network use with Windows NT, you need TCP/IP networking protocol