Table of Contents
Advertisement
Figure 93. Removing the power interposer board
3. Lift the PIB away from the system.
Next steps
Replace the power interposer
board.
Installing the power interposer board
Prerequisites
1. Follow the safety guidelines listed in the
Safety
instructions.
2. Follow the procedure listed in the
Before working inside your
system.
Steps
1. Align the slots on the PIB with the hook on the PSU cage and slide it into place.
2. Using Phillips #2 screwdriver, tighten the screws to secure the PIB to the system.
102
Installing and removing system components
Advertisement
Table of Contents
