gefran GFX4-IR Series Installation And Operation Manual page 4

Table 1 EMC Emission
AC semiconductor motor controllers and conductors for
non-motor loads
Emission enclosure
compliant in firing mode single cycle and phase angle if
external filter fitted
Table 2 EMC Immunity
Generic standards, immunity standard for industrial
environments
ESD immunity
RF interference immunity
Conducted disturbance immunity
Burst immunity
Surge immunity
Magnetic fields immunity
Voltage dips, short interruptions and voltage immunity tests
Table 3 LVD safety
Safety requirements for electrical equipment for measurement,
control and laboratory use
ATTENTION
This product has been designed for class A equipment. Use of the product in domestic environments may cause radio
interference, in which case the user may be required to employ additional mitigation methods.
4
EN 60947-4-3
EN 60947-4-3
CISPR-11
EN 55011
EN 60947-4-3
EN 61000-4-2
EN 61000-4-3 /A1
EN 61000-4-6
EN 61000-4-4
EN 61000-4-4/5
Test are not required.
Immunity is demostrated by
the successfully completion of
the operating capability test
EN 61000-4-11
EN 61010-1
80404L_MHW_GFX4-IR_03-2020_ENG
Class A Group 2
4 kV contact discharge
8 kV air discharge
10 V/m amplitude modulated
80 MHz-1 GHz
10 V/m amplitude modulated
1.4 GHz-2 GHz
10 V/m amplitude modulated
0.15 MHz-80 MHz
2 kV power line
2 kV I/O signal line
Power line-line 1 kV
Power line-earth 2 kV
Signal line-earth 2 kV
Signal line-line 1 kV
100%U, 70%U, 40%U,