Designation - SaMASZ KDC 260 S Operator's Manual

3. DESIGNATION

Mower is equipped with „Perfect Cut" cutterbar. Tab. 1 provides differences in mowing height
depending on angle at which cutterbars operate.
Tab. 1. Mowing heights depending on cutterbar and its inclination angle
„Perfect Cut" cutting bar
No tilt
Standard mowing height
Optional heights when using high mowing topping
Optional heights when using high mowing double topping
Rotational suspended disc mower is designed for mowing the following: common grass,

medick, etc on meadows and on stone free fields as well as forming swath out of these. Meadow
being mowed should be even, previously prepared by rolling. With advantage of high grass the
first and the second row should be cut at height of 6 - 7 cm, while with great share of lower
grass – at 5 cm. Therefore, the final row should be cut a little bit higher so 7 - 8 cm from the
ground.
Trailed mower with swath conditioner/rollers is designed for mowing the following: common

grass, medick, etc on meadows and on stone free fields as well as forming swath out of these.
As a result of shifting the consequent forage layers due to operating flails/roller grass stalks are
being broken and/or crushed as well as are loosing wax layer. It makes grass drying process
simpler and faster by approx. 30 - 40%. Rollers are particularly recommended for mowing
papilionaceous grasses such as medick.
Meadow being mowed should be even, previously prepared by rolling and other processing.

Operator's manual
3° tilt
NOTE: Mow very rare grass with zero angle inclination.
Trailed disc mowers
5° tilt
- 4 -
KDC