All Parameters Measurement; Voltage Parameters - UNI-T UPO2000CS Series User Manual

UPO2000CS series User Manua

8.1 All Parameters Measurement

Press the MEASURE button to enter the automatic measurement menu. Then press F1 to select the source of the
measurement. F2 can be used to select all 34 parameters.
Measured parameters color are consistent with the current channel.
When "----" is shown, it indicates that the current source has no signal input, or the measurement result is not valid
(too big or too small).

8.2 Voltage Parameters

UPO2000CS series oscilloscope can automatically measure the following parameters:
• Vmax: Voltage at the highest point with respect to GND
• Vmin: Voltage at the lowest point with respect to GND
• Vtop: Highest stable voltage
• Vbase: Lowest stable voltage
• Middle: Midpoint between highest and lowest stable voltage
Voltage Parameter Diagram
65