General Safety Overview - UNI-T UPO2000CS Series User Manual

General Safety Overview

This instrument strictly complies with the safety requirements for electronic measuring instrument GB4793 and
IEC 61010-1 safety standard during design and manufacturing. Please understand the following safety
preventative measures, to avoid personal injury, and to prevent damage to the product or any connected
products. To avoid possible dangers, be sure to use this product in accordance with the regulations.
Only trained personnels can perform the maintenance program.
Avoid fire and personal injury.
Use the correct power line:
country for this product.
Correct Plug: Don't plug when the probe or test wire is connected to the voltage source.
Ground the product: This product is grounded through the power supply ground wire. To avoid electric shock,
grounding conductors must be connected to the ground. Please be sure that the product is properly grounded
before connecting to the input or output of the product.
Correct connection of oscilloscope probe:
connected. Do not connect ground wire to high voltage.
Check all terminal ratings:
marks on the product. Please also refer to the product manual for details on the ratings before connecting to
the product.
Do not open the case cover or front panel during operation
Only use fuses with ratings listed in the technical index
Avoid circuit exposure:
Do not operate the product if you suspect it is faulty, and please contact UNI-T authorized service personnel for
inspection. Any maintenance, adjustment, or replacement of parts must be performed by UNI-T authorized
maintenance personnels.
Maintain proper ventilation
Please do not operate the product in humid conditions
Please do not operate in inflammable and explosive environment
Please keep the product surface clean and dry
Only use the dedicated UNI-T power supply appointed to the local region or
Ensure that the probe ground and ground potential are correctly
To avoid fire and the large current charge, please check all the ratings and the
Do not touch exposed connectors and components after power is connected.
UPO2000CS series User Manual
4